Reply With QuoteGet a manual!
Registered User
New to the board
i have a 84 110 atc and im trying to get the clutch off. how do i get it off? and what can i do to keep the clutch from spinning?
Registered User
At the back of the pack
85'-350x, 77-CT70, 76'Kaw H1-500... If it isn't broke, don't fix it!...They always run best before they blow!
Registered User
Arm chair racer
If you mean the centrifugal clutch they usually have a left hand thread nut at least the 200 does can't say for sure on a 110. Using an impact gun should spin it off easy. Should be a 30mm socket.
Registered User
Roostin Away
Its a special socket with 4 prongs to remove the clutch nut and the easiest way I have found to remove it is with a Air Impact . Their is a special large Honda clutch wrench that holds the clutch while removing the nut but I never felt the need for one .
85 Yt60 Tri Zinger
76 atc 90/180cc Nicholson ( Original Bob " ACE " Williams built motor )
78 atc 90/180cc Dickson Full Suspension
79 atc 110/151cc Bandito chrome frame
82 atc 110/123cc Nicholson (Original parts from Team Honda rider Tommy Gaian )
84 KLT 110/123cc powroll ( Original Racer from the 1980s )
87 atc 125m stock
82 atc 110 stock
84 atc 200x Curtis Sparks
84 atc 200x Powroll ( My Original race bike from the 1980's )
71 cl175 Like new original